A high quality self adhesive foam electrode coated with US made Tyco gel adhesive. Flex Plus electrodes are black in color and utilize a black carbon conducting wire mesh for increased flexibility and conductivity. Reusable, non-latex, self stick adhesive electrodes conform well to the body and are compatible with all TENS, EMS and Micro-current units. Available in 2" square or 2" round they come as a package of 4. Electrodes include a built-in 2 mm wire jack which accepts the TENS leads wires we carry.
more info

Converts any TENS lead wire with standard 2 mm push pin plug into a 3.5 mm jack, allowing the use of all 3.5 mm plug accessories with the Ito ES-160, E-600 HAN and AWQ-105 PRO. The polarity of the TENS lead jacks are color coded (black and red) for easy identification. Measures 6.5" in length.
more info

Designed for facial, auricular or body treatments, these 5" probes are a great accessory for your electro-therapy device. Probes are versatile, as they contain space for cotton swab tips for facial stimulation, or you can use the 2 mm diameter metal probes (included) for auricular and body stimulation. Two Cotton Tips are also included. Probes contain 3.5 mm jack and 54" lead wire. Made in Hong Kong.
more info

Best uniform quality, all USA made. May be used with all TENS and EMS, or Microcurrent devices. Reusable, self stick adhesive, electrodes are long lasting, conform well to the body and are non-latex. The small and medium may also be used under a heating pad. Electrodes include a built-in 2 mm wire jack which accepts TENS Lead Wires.
more info

72" long wires include 2 chrome-plated duck beak clips. May be used with all electro-therapy devices with a standard 3.5mm jack. Cord colors are subject to change.
more info

Reusable, flexible flat rubber TENS electrodes. Use with Conductive Gel or Tack Gel and TENS Lead Wire. Pkg of 2 pcs.
more info

Globular soft rubber (GSR) electrode (0.5" dia) provides stimulation to the acu-point. Alligator clip wire is attached to the protruding rubber tip of the electrode. Use with tape and conductive gel. Pkg of 50.
more info

Gold plated 0.15" dia north and south reusable 3,000 gauss REC magnets embedded in 0.5" dia GSR rubber electrodes. Alligator clip wire is attached to the protruding rubber tip of the electrode. A conductive gel is recommended. Includes four 30 mm plasters.
more info

Will adapt to stimulators which use the standard 3.5 mm jack. Improved alligator jaws will grip the thin blade of the needle or electro-magnets. 72" to 78" long with 3.5 mm jack, in assorted colors.
more info

These 1.4" long jacks make converting output sockets easy. The silver Convert.2.5 converts a 2.5 mm plug to a 3.5 mm one. The black Convert.3.5 converts from 3.5 mm to 2.5 mm.

Note: These do not fit the newer TENS, Micro and EMS units that we currently carry
more info

Converts one output channel to two. Small plastic adapter plugs directly into any stimulator output jack using a standard 3.5 mm (1/8") plug.
more info

The 2 mm push pins on these wires are designed for TENS electrodes. Available with either a 2.5 mm (36" long wire) or 3.5 mm (48" long wire) plug (for electro-therapy devices). The Pin-Pin Extender Wire may be used with either the 2.5 or 3.5 mm lead wires, and will extend their length by 36".

Note: The newer TENS, Micro and EMS units that we currently carry all require special TENS lead wire with a 4 mm dia recessed jack.
more info

Similar to the Alligator-Pin Conversion Wires, only with lightweight alligator clips. Converts any TENS lead wire with standard 2 mm push pin jacks into micro alligator clip connectors. Wire measures 5" long with red and yellow colored connectors. Designed for use with the Neuro-Wave 6 unit, but can be used with any device that uses TENS lead wires. Set of 2 clips.
more info

Converts any TENS lead wire with standard 2 mm push pin jacks into alligator clip connnectors, 5" long, includes red and black colored connectors.

Note: Self-adhesive TENS electrodes use this same type of 2 mm plug connector.
more info

Replacement TENS lead wires for the BioStim Plus TENS and the Micro Plus Microcurrent units. This unique jack will only fit these two units.
more info

New quick and easy grip. 0.1" x 0.2" interlocking prongs securely grips the needle body without slippage. The EZ.Grip.72 is 48" long with a 3.5 mm jack, and will adapt to stimulators which use the standard 3.5 mm jacks. The EZ.Grip.6 allows any TENS lead wires with standard 2 mm push pin jacks to use these clips.
more info

Provides the most secure and positive grip to the needle blade, a plunger type connection mechanism releases the micro-hook which firmly grips the needle blade. Wire is 50" long (100" end to end) with a 3.5 mm plug.
more info

Dual pen probes (5" x 0.4" dia each) allow treatment to 2 points at the same time. 0.1" (2.5 mm) dia probe tip allows treatment for both the ear and body. May be used with all electro-therapy devices. 54" long wire with 3.5 mm jack.
more info

Straight, 5" x 0.4" dia pen shaped probe uses a 0.1" (2.5 mm) dia tip for treatment to both the ear and body. Includes attached 2.5" x 0.4" dia hand ground pole, 60" wires with 3.5 mm jack.
more info

Used with TENS lead wire with 2 mm push pins (ordered separately). 7" long x 0.5" handle with 0.3" dia conductive tips. Easy to use with only one hand, tips adjust and spread apart from 0.5" to 3" wide. May be used for facial and other body points. It is necessary to apply conductive gel on the tips to achieve proper conduction and stimulation.
more info

Detachable hammer probe features a 1.8 mm dia stimulation tip and 0.15" dia cup container for moist cotton. Includes 3.5" x 0.5" dia hammer probe, 3" x 0.5" dia ground pole, and 72" long banana plug connecting wire with 3.5 mm jack. The Q-10 Cup Rod (3.5" x 0.5" dia) accessory includes a 0.4" dia cup for holding a moist cotton ball.
more info

58" long wires include 2 banana plugs and 3.5 mm jack. May be used with the Jumbo Rolling Drum or the Q-10 Probe Kit (included with kit).
more info

This new and improved version features an all-plastic design that clips easily and comfortably onto any ear. Measuring 0.4" wide x 1.6" long, these larger electrodes include a rubber pad and pin jacks. May be clipped onto the ear lobe or other flat areas of the ear. Two clips are required to complete a circuit on any TENS lead wire with 2 mm push pins. Design subject to change.
more info

A recommended accessory for all electro-therapy devices! 1.2" dia external microphone speaker, monitors or diagnoses electro-therapy device output channels (or connecting wires) by sound. A clicking sound will be heard with each frequency pulse. 3.5 mm jack.
more info

Flexible, rubberized stretch fabric, velcro fastening straps. Holds TENS electrodes, magnetic electrodes, or other devices comfortably on any part of the body.
more info

Lectron II conductivity gel may be used with GSR, TENS, and MEA electrodes to improve stimulation. High conductivity, hypoallergenic, perspiration and temperature stable. Spreads and removes easily, will not dry or leak. 90 ml (3 oz) tube.
more info

Electrically conductive adhesive, used with TENS electrodes. Eliminates the need for tape. Water soluble, non-staining. Secures electrodes in place and assures uniform contact. 50 gram tube.
more info